Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
Low pressure blinking on Laars LX heater check pressure switch
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
my laars lx pool heater is blinking LOW PRESSURE. How do I fix? The heater needs good water flow or it will overheat. You probally have a full basket in your pump or your filter is dirty.
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
...Specifically this is the part for a heater built after 2003 ...
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
where is the hi temp limit switch located? where is the hi temp limit switch located on jandy LX where is the high temp limit switch located on my laars 44000 pool heater
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
...Assembly on a Laars LX 400 pool heater. When I connect the E01958 cable harness it is shutting down my pool controller. When disconnect the pool controller works fine. Any ideas? shorted ...
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
how do i reset the laars lx pool heater/400 btu / natural gas turn off then back on
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
Changing the filter in jandy Laars lx pool heater no filter to change check filter filters
laars lx won't ignite We have had this heater since 2000. The fan turns on, I see the orange flame when the pilot lights, I hear the click that let's you know the gas was released, I smell
Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas
Laars LX Heater not starting I have a Laars LX250 thatis not starting the ignition sequence (thermostat clicks, but the blower does not start). I have checked the fuses. Would this be the ignition ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions