Questions & Answers for: kp 46wt510 convergence

...kp-46wt510 where can i buy the stk 329-560? how do I replace them to fix the convergence problem You can get new convergence ICs at the following link and they provide free instalation instructions ...

KP-46wt510 Convergence issue I have had the Sony KP-46wt510 for about 3 years and it has been great. Just today I went to turn it on and the red convergence is out of allignment and I can not manually

...KP-46WT510 projection TV. Thanks in advance for your help. The full downloadable service manual located Here! will have a list of all parts. Below are a few remedies for convergence: Subject Poor ...

...KP-46WT510, please help. you need to replace the convergence ICs, pico fusses and possibly a couple of the feed resistors. you can get the kit for your model at the following link which contains the ...

...KP-46WT510 will not converge. Replaced STK's, fuses ok, +/- 22 VDC ok, still can not move any convergence points in manual?? LED blinks 5 times?? did you checke the two 5amp IC protectors located on ...

KP-46WT510. I see that the refommended solution is to replace the convergence IC's. What are they are they and are they user replaceable? The convergence function on the menu does not allow me to line

...Convergence out ICsare located on D Board of Sony KP-46WT510 These are 2 big ICs of black color mounted on silver heat sink. Check out location of D board in TV in below exploded view... Thanks

...kp-46wt510; red, yellow, blue are not aligning. tried auto convergence AND manual--picture is curved and colors are separated. You need to replace the convergance IC's and a pico fuse on the power ...

KP-46WT510 TV. I have a red shadow in 3d on sony KP-46WT510 Ur convergence is dead.Problems:Are 3D colors,colors misaligns,and colors out of focus.Know how to solders?Must change 2 convergence ICS,and

...KP-46WT510 the picture bows to the middle i tried fixing the convergence and it does nothing what else should i try If the convergence feature did not fix the issue then you will need to install a ...