Question about Televison & Video
woman with a dog. That's it Channels will not load; only finds one analog channel and 0 digital channels. It is not the cable. When I push channel up,I get DC03-1. I get only one picture on the set, a
Threads knotted under the plate in the feed dogs. Removed the plate, cleared the knot, all five threads are ready to come back up through the feed dogs, but don't know which ones go where. The machine
Question about 15202 Mechanical Sewing Machine
feader dogs will not move material. thread knots up Thread knots because the material is not feeding. Sounds like the machine has not been oil or serviced in some time and the old oil is turned into a
Can I make a homemade dog muzzle? To make DIY dog muzzle, use any long strip of material that you can find like ribbon, maybe some old pantyhose or rope. From the dog's nose, loop it under the ...
Question about 3116 Simple
the feed dogs seem to have dropped. they are below the plate . whats the probelm? it knots up and does not go forward . knots up in the bobin area, have to pick thread out with tweezers Please go to ...
How do I properly give my dog a bath? Before getting wet, brush your dogs fur to remove all knots and dead hair. Next put your dog in a tub filled with a few inches of lukewarm water and use a ...
My sewing machine model is B 750 QE. Always starting to sew the lower thread keeps knotting up it drags down the fabric and the cogs come on the screen..So I looked at the instructions and followed ...
Question about 3116 Simple
The buttonhole attachment sews in one place, making a big knot of thread. sounds like the feed dogs are not engaging the fabric. check that the feed dogs are up and check the stitch length. Also, if ...
Question about 3116 Simple
My material doesnt want to move forwird only when i pull it very hard what can be the problem Ok, the feed dogs have been lowered and you must fine the lever that raises the feed dogs. There should ...
The bobbin thread knots up and the needle thread breaks Incorrect tension for material. Old knotted thread. Bobbin thread and needle thread must match. Thread and needle size suitable for the material
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions