thread bunching Thread buches up under material and jams the needle/bobbin. please help. Also, lost manual and not sure if it is threaded properly. Thanks Bev I discovered that when the thread is ...
Threading CG-590 Cannot thread Singer CG-590 properly. Thread on underside of fabric keeps looping and knotting up. Have re-threaded the machine 7 times with no different outcome. Manual says thread ...
...knots up. If the thread on the top looks like a straight line, it is too tight on the top or too loose on the bottom. Unless the bobbin case tension has been adjusted, the problem is usually on the ...
Question about Drop-In Bobbin 758B-28BH Mechanical Sewing Machine
have dificulty ftting the bobbin holder in a singer 974 machine Other problems: upper thread snaps, even when thread tension is low. bottom thread sometimes has skipped stitches sometimes the bottom ...
Question about Drop-In Bobbin 758B-28BH Mechanical Sewing Machine
joecoolvette, so far I think I am able to isolate the power outage area. By using a Voltage Tester I found in my attic a wiring entrance (hole) where four wires are present: two energized wires come ...
I have an older Kenmore top loading washer model 11082994100. The machine is in excellent condition and I replaced the main control board a couple of years back. Issue is lately when machine goes to ...
janome 3022 My machine seems to be catching alot. when quilting it catches and causes a knot on the underside. I have cleaned it thoroughly and it still happening. Help please! Check this LINK... for ...
Question about Drop-In Bobbin 758B-28BH Mechanical Sewing Machine
I would like to begin making Maxcrame so I need all the help I can get, with th4e knots and patters as well please? you can get all the downloads from the net but to get a really good understanding , ...
Question about Drop-In Bobbin 758B-28BH Mechanical Sewing Machine
i have a McCulloch 2618 cav chain saw and the chain adjusting screw has broken. How do i replace it. [PDF]IPL, McCulloch, Mac 2618 CAV, 952802079, 2008-05, Chain Saw ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions