Questions & Answers for: knob for radio Audio Players & Recorders

Question about 19 DX IV CB Radio

1 Answer

...knob on one of my radio's. When ever you wiggle the knob it just makes awful noise. If this is a similar problem, you can try to clean the knob with electrical contact cleaner. If that doesn't work ...

Ad

Question about 2004 Corvette

6 Answers

...remove the radio to change the radio battery. please help Below the radio is a panel held on by two knobs labelled "driver" and "passenger." Unscrew these knobs to get to the radio battery cover. ...

Ad

Question about SC200 Handheld Scanner

1 Answer

knob. Can i get this part? Can i install it myself? Any help would be great. THANKS Yes you can get this part from a radio store, like Radio Shack, and most of these knobs can be installed by hand. So

Question about SC200 Handheld Scanner

5 Answers

...radio? the one we have has a panel above the radio that has a pic of like a road map on it the knob in the center left side unscrews and lets you get to the 4 AA batterys with a phillps screw ...

Question about DX-2547 40-Channels Base CB Radio

2 Answers

...radio there are two RF knobs. One says RF power, this is your TX power control, turn clockwise to increase. There is another knob that is a knob within a knob that says Mic(inner knob) and RF( outer ...

Question about DX-2547 40-Channels Base CB Radio

1 Answer

...radio. The knob has a black outer shell, and a plastic insert that fits over the radio pin, and turns the mechanism. Toyota can only sell me the black shell. They need to remove the radio to fix. Can ...

...radio. The volume knob is loose. If you touch the volume knob the sound will go from loud to soft without turning the knob. It seems like the knob must have been hit accidently. I called BA and asked ...

Question about DX-2517 CB Radio

1 Answer

...radio already has an echo board installed in it from the factory. On the bottom set of knobs, left side, over three knobs. That knob is your echo/delay knob. No need to install one. Just turn it ...

Question about DX-2517 CB Radio

1 Answer

...radio already has an echo board installed in it from the factory. On the bottom set of knobs, left side, over three knobs. That knob is your echo/delay knob. No need to install one. Just turn it ...

...radio? Usually located on the Tuning Knob by pushing it down to activate the Menu on newer style radios that have a digital screen or on some older radios it may have a second Fade Knob located under ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...