Questions & Answers for: Midland knob for radio

Question about 79-290 120-Channels Base CB Radio

2 Answers

...radio is in excellent condition, ran and checked power wires with good continuity through the system, 12.5 volts. When you turn the power knob on, nothing happens. I tried shorting out the faceplate ...

Ad

Question about 77-115 CB Radio

1 Answer

bracket knobs Anyone know what size bracket knobs are used on this radio? Are they 4, 5, or 6MM? Hello ptcruiser 1, I don't have one of those radios right here in front of me, but if I remember ...

Ad

Question about 1001Z 40-Channels Base CB Radio

1 Answer

...get 100 yard down the road and he can hear me but I can't hear him. We've messed with the tuning knobs but still he can hear me but I can't hear him. My display shows that the CB is picking up ...

Question about 1001Z 40-Channels Base CB Radio

2 Answers

...knob as the clarifier and installed a five pin mic connector in the radio and it's mate on the mic. Not a job for those who are not used to doing this! But the radio is worth the repair as it is a ...

Question about 75-822 40-Channels Handheld CB Radio

1 Answer

radio. I get power, but no volume. Do I have a button or something muting it, I am having trouble finding one. You squelch may be too high, rotate the knob all the way to the left, counter clockwise..

Question about 79-290 120-Channels Base CB Radio

1 Answer

...getting the radio unto 27.515 LSB. this is a recent problem that i am experiencing. By pressing two knobs on the right I was able to get to the frequency. Now I am not getting to the frequency. What ...

Question about 79-290 120-Channels Base CB Radio

1 Answer

...radio? Do you hear any hissing at all?Do you have an external speaker hooked to it if you do ,unhook it if not hook one to it , maybe your internal speaker is blown. Could be a switching diode.Could ...

Question about 79-290 120-Channels Base CB Radio

1 Answer

...a squelch adjustment?(it allows you to adjust sensitivity of the "gate" on the receiver).Turn the knob counter-clockwise until it just goes quiet.The receiver will be silent until a transmission is ...

Question about LXT420 (14 Channels) 2-Way Radio

1 Answer

...radio on a midland lxt420? Turn the squelch knob either clockwise or counterclockwise until the noise stops. Go no further than just where it stops. If that doesn't work there may be a defect. If ...

Why won't it change channels, transmit, and make static when turned all the way down? Pulled my old unit off the shelf and put new batteries in it. She looks like she powers up. did you have it on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Midland Radio Communication Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...