Questions & Answers for: kitchenaid gas cook top igniter

KitchenAid KGCS100SAL0 Gas Range Top, one igniter doesn't work On the KitchenAid KGCS100SAL0 Gas Range Top, one igniter doesn't work. I have changed the igniter with another one and changed the wiring

Ad

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

top gas burners seem to work fine. Is this the igniter?? Help! pull out the racks and remove the bottom floor of the oven,turn it on bake,if the ignitor doesn't glow most likely it's bad,if it

Ad

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...doesn't develop ANY heat. We vacuumed underneath the dryer's filter and pulled out some lint, but it went from OK to NO GO in one load. Unit is about five years old and gets lots of home use. ...

Question about 30 in. KGCS105GSS Gas Cooktop

1 Answer

...gas cook top. It has polite lights. Is there any kit to change it over from polite lights to a up to date igniter system? no there is not the burners wont have anywhere the electrodes could mount ...

Question about KGRS807SSS Gas Kitchen Range

1 Answer

Kitchenaid gas stove. The igniters for both the burners and the oven aren't working. There's no clicking sound at all. You can light the stove top burners with a match, so we know that the gas

Question about KGRS807SSS Gas Kitchen Range

2 Answers

...KitchenAid gas range superba, how do i clean the burner, one of my front burners the gas flow is very low, the stove has the glass/ceramic top with no wells & no way to get to the burners...only ...

Question about KGRS807S Gas Kitchen Range

1 Answer

...igniter in, still doesn't work Trace the wire from the igniter to the spark module. Make sure it is not broken or pinched between the frame of the range. If so, this can cause the problem your ...

Question about Meridian 32 Inch 5 Burner Gas Grill With Warming Drawer - Natural Gas

1 Answer

...gas is turned on and that the valve is fully open. Next, take out both the heat distribution plates and cooking grate. Turn the grill backwards, and hit the snap igniter a few times and look for a ...

...cook top i wokeup in the morning and the oven was running in convection mode with out anyone turning it on. i went to shut it off and the touch pad woldnt work. so i unpluged it to reset it. it took ...

Question about KGSA906PSS Gas Kitchen Range

1 Answer

kitchenaid.com/.../Use%20and%20Care_EN.pdf KitchenAidIf you should experience a problem not covered in TROUBLESHOOTING, ... You will need your model and serial number, located on the oven frame behind

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

Paul Carew

Level 3 Expert

3808 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66824 Answers

Are you a Cooktops Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...