Questions & Answers for: Panasonic keypad tone

...keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and ...

tone hanging both lines are not working hear only dial tone keypad not working There are two wires going to your phone. Inside the wall jack, switch the red and green wires and the keypad should work

...keypad (first row of keys under the handset's display) should read Flash when you are on a call. Hit that button, you'll hear the line tone, dial the number and wait for the other person to answer. ...

...tone during a call, so I cannot "Press 1" or any number to use automated options. It does dial numbers ok?? If it dials O.K., try pressing # and see if it turns on the DTMF pad. You could have pulse ...

keypad. Use the FWD\DND key to move forward on the display and the CONF key to move backwards. Press AUTO DIAL STORE (Confirmation tone) Press SP-PHONE key once (display shows current time flashing on

...keypad (1 is already default). When you're satisfied with the tone, press STORE. You have to do this for each line and the intercom you want to change and you need to do this at each phone. Pick ...

...keypad it sounds like I'm in speaker phone mode, but there's no dial tone, and I can still pick up calls with the handset. What do I do? LOL  Guessing you have turned BGM ...

...tone, the factory default) or 2. Then Save (a softkey with the label in the LCD screen) and Off (opposite Talk on the keypad). The manual for the Panasonic KX-TG5664 is available from Panasonic here: ...

KEYPAD sound Keypad won't beep when dialing. I cannot hear any sound when I press number on keypad. Keypad tone is disabled!

Phone has bad static on it. Bought a new one and now the new one has static as well. This is a line issue. Not the phone. The best way for you to trouble shoot is to disconnect all lined from the hub ...