Questions & Answers for: keyboard not working Audio Players & Recorders

...working.this keyboard is new last month i am used.presently is not work my key board but this keyboard use to another computer is working. what problem i don't no? please tell me Is it a USB keyboard ...

...to see wether that keyboard are working, check the tree LED rigthht side upper of your keyboard, this indicators should ligth evrytime you log on, if not, use the warranty to change a working

Keyboard does not work KB-0532 Gateway keyboard does not work when plugged in. I have restarted my system and it still does not work. The mouse that came with the keyboard does however. there is a ...

...keyboard not working If you get 'Keyboard Failure' message it can have two reasons. 1) The keyboard is not working properly. You will have to replace it. 2) If your keyboard has a PS/2 jack, the PS/2 ...

...Can not type, keyboard does not work Try with a known good keyboard Try first with working keyboard if not work check keyboard lock swicth or jumper or keyboard type selection jumper on ...

keyboard, mouse not working I have followed http://www.fixya.com/support/t383406-keyboard_not_responding_hp_pavilion_dv Even removing battery is helpiing me. Keyboard and mouse always not working. But

...working but keyboard is not working Mouse still working but keyboard is not. Have replaced batteries. try a wired working keyboard on the same port to identify whether it is keyboard or port

my keyboard will not work Hi, Keyboard Is Dirty: Keyboards should be cleaned with "spray-n-wipe" cleaner and a cloth or tissue on a monthly basis. Ensure that computer is not powered up while cleaning

...keyboard working or not, if not working then follow tip 2. Tip 2: Restore your system: System Restore is the best way to solve keyboard software problems. If your keyboard not working after install ...

...working. keyboard numbers are working. purchased this new keyboard because had the problem on former Dell keyboard. must not be keyboard problem. I now assume it is a settings problem. Press the num ...