Questions & Answers for: key 1 stand car stereo

...1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by light (red) flashes on/off until just before picture first appears. Takes about 5 minutes for picture to appear... Then ...

a battery charger on put the key on handbrake on to take off daytime lights if you have them. Turn the radio on for an 1 hr to 1 hr 1/2 until the display reads 1000. Enter your radio code and your set

1)turn car iginition "ON" 2)turn stereo ON and then OFF. 3)Press SRC or Joystick until blinking clock appears 4)Set clock by pressing rt,left &top,bottom keys around volume knob (joystick). i hope

stand by were it is running demo mode and hold number 6 till it switches off. As for the key problem its the key that is making the key live connection on your model of car so this can not be changed.

...1 wire for power its red..To set the unit up to shut down when you turn truck off that red wire must be on a keyed power wire.which means, a power wire that come on only when the key is turned to the ...

1/8 TRS (stereo) to 1/4 TRS (stereo) cable from the PC into the Stereo 1/4 inch jacks right below the RCA stereo input jacks. TRS stands for tip-ring-sleeve which means the jacks have the extra "ring"

...3.5 mm stereo jack (like on a computer headphone jack). So if the headphones have a 1/4" plug, you need a 1/4" to 3.5 mm adapter. I hope this helps. Cindy Wells You can use the adapter, I did the ...

stereo has a DVD recorder and a video/audio input then you should be able to use it. I dont know of many stand alone "stereos" that do this. In general, stereos only deal with audio, but newer stereos

...1. Hit the Stand-by or mute button. 2. Replace the batteries in remote, use remote to power down & up. 3. connect speakers 4. select FM, connect FM antenna, hit mute or stand-by button 5. Turn up ...

...1: During the code request mode, while holding the DISP key depressed, press and hold the "Volume UP" or "DOWN" key for three seconds until the " ... " display disappears. Enter the security code ...