...VR-715 and for the life of me I can't get the volume up. I have re-set everything according to the steps in the manual a number of times to no avail. If you crank the volume it stays at a low level. ...
...most of them come with a preamp. Usually turns on with a switch located on or under the unit. I HAVE KENWOOD VR-715 I WANT TO CHANGE MY SUBWOOFER,MY SUBWOOFER IS ONLY 100 WATTS,I CHANGE TO 150 ...
Kenwood VR-715 reset? Is there a way to reset my vr-715 back to manufacture settings? Something is way wrong. Hello llarosa, Yes, there is. Unplug the power cord from the wall outlet, then plug it ...
Works fine, but led display suddenly stop working This symptom is quite often seen when there are bad connection at the display itself. Generally on the front panel, the display will be a long part ...
Can you help me to solve this problem? The only other likely cause is "it's broken". A hands-on tech needs to look at it. http://www.retrevo.com/support/Kenwood-VR-715-Receivers-manual/id/480bh244/t/2
Can I use 180 watt rated tower speakers from Sony with my VR 715 receiver which is rated 100 watts. Thanks, Dave. Absolutely.
...Kenwood VR-715 surround sound system, Dish Network receiver, and HD LCD TV together so the surround sound works? Can't figure out what goes in the input, the order of the connections or whatever I'm ...
gets warm, loud pop and then no sound Hi, You're ouput IC was blown, this is caused by an overload. Continuous running the unit in high volume produced more heat to the output IC and when exceed the ...
vr-715 kenwood flashing standby light and no sound tried disconnecting all speaker wires one at a time and left unplugged over night http://manual.kenwood.com/files/B60-5337-00.pdfSays speaker wires ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions