Questions & Answers for: kenwood receiver shuts

Kenwood 1080VR - shuts down As soon as I turn on the receiver it lights up, clicks, then shuts down. It does not stay on long enough to power any sounds thru the speakers. Any ideas? try unpluging it ...

Kenwood VR-209 Receiver doesnt stay on Can i get assistance? My Kenwood VR-209 Receiver comes on but cuts back off after a few seconds The power transformer is bad. Part # L07-2485-05 it costs about $

...kenwood amplifier when iwant to turn the volume high it always automatic shut down? You need to make sure you ohms are correct if there too low this will happen to protect the amp. This is generally ...

...Kenwood Receiver with just shut off and I have to power cycle it a number of times for it to finally come back on. When it shuts off the Standby light is flashing I had to list it as a VR-406 but is ...

Kenwood vrs-7100 surround sound receiver turns on and shuts off When I push the power button on the receiver, it turns on momentarily and shuts right down. Then the little red LED light for standby ...

Kenwood VR-509 Receiver won't power up... Re: my Kenwood VR-509 Receiver - Luv it! But it's dead. Upon powering up, in a few seconds it shuts off with a flashing 'standby' LED. Unplugged all ...

kenwood vr-405 turns on only momentarily and then shuts off turns on only momentarily and then shuts off leaving the red standby light fast-flashing your receiver has a bad audio output ic.replacing ...

...Kenwood product may require repair. "Protect" is how the microcontroller inside the receiver is trying to tell you that something is wrong and if the unit did not shut down, further damage could ...

...Kenwood Marine Stereo KMR-350U shuts off after it has run in the USB mode for a period of time. The stereo will shut off after 20 minutes when in the standby mode, but it regularly shuts down while ...

I need help with a kenwood kr-3600 receiver. It was working & my speakers hummed then the receiver just shut off and won't turn back on. bad power supply