Questions & Answers for: kenwood cb

mike cable needs rewiring on Kenwood KMC-35 I would like the schematic wiring diagram for a Kenwood KMC-35 mike. downloaded the schematic of the radio and figured it out myself

Voltage of the backlight on the Kenwood TS-60 Need to replace the backlight on the Kenwood TS-60 Transceiver radio. Need bulb voltage, type or number. Any specifics would be helpful check voltage of ...

kenwood KRC-930 is turned all the way up but still there is little noise Check the external speaker socket as the switch side of it could be dirty cutting the signal to the internal speaker. Also some

...CB and the Kenwood. It seems that there is stray rf floating around. Check your antenna. Make sure it is getting a proper ground. If mag mount; make sure base of antenna and where you put it are both ...

kenwood rx 29 protect Is this resolved? If not post more info

Wiring JCD-201M to the Kenwood TS-2000. Wiring JCD-201M to the Kenwood TS-2000.

kenwood trc 70 frequency display not complete how many digits showing and is it a new radio?

no am usb lsb cw works but no am,quiet but signal is busy someone played with their radio without knowing what to do?

need diagram for turner +3 desk mike 8 pin to ts140s Turner +3 to Kenwood TS140S Pin 1 is White (audio) Pin 2 is Black (Transmit/Keyup) Pin 7 is Shield (Common/Ground)

HOW TO FIX KENWOOD HF TS-690S NO POWER OUT Hell i got hf KENWOOD TS-690S WICH WAS WORKING WELL NOW I FOUD THAT NO POWER OUT AM UBS . I GOT TO CHECK SWR WELL OK 1.1 COLD GOOD START TO GO LOWER UP TO NO