Questions & Answers for: kenwood amp triangle red light

...amp usually has 2 lights that come one once its earthed properly. one is in a red triangle. the other is an a blue straight line. something has happened and now only the blue light comes on. check ...

...on one day and i got no sound out of the amp. the red triangle light somes on, but the blue light never does. i didnt unplug anything and no fuses are blown. it might be ur ground check the gound ...

...could have blown the amp...again since the power indicator(red triangle in the center of the amp) is red it could always be that your head units RCA outputs are bad if you have any hooked up at

...kenwood amp is flashing and i do not know what to do to fix it. no sound is coming out of my subs i have a smaller kenwood amp but it has the same triangle, i had that problem too, so i ran a ground ...

...triangle light is red, and there is now sound. All wires are hooked correctly... on most amp red isnt good that means it in protection mode try turning your setting on the amp down all the way and ...

...amp is going into protect mode. You can either keep it turned down or possibly reconfigure the speaker connections for a higher impedance. If you tell be the model of your sub, I may be able to ...

Kenwood amp red light so i recently moved over my kenwood amp into a new a car and i wired everything new, the amp gets power but wont put out any sound to the sub, the amp is powered but i notice ...

...kenwood Kac-9105D 2 channel 1800watt amp was working fine the night befor. but i took my system out of my car to clean my car up real good and to put new back seats in. Well after i was done doing ...

My triangle led light on my kenwood amp comes on red then goes right off when I turn my car on what is the problem Normal.

Kenwood 7252 1000w amp red light When I turn the switch on in my car a red light comes on in the triangle on the amp. everything works fine as it should just confused. just got the amp and there isn't