...Kenmore 80 series washer #110.16862503. Was working fine stopped in mid cycle. When you pull start button it buzzes and flickers house power and trips breakers. Took apart and motor coupling is fine. ...
Kenmore 80 Series Model 110.20862990 Type 111 Put washer in Rinse/2nd rinse Cycle. Starts to fill, push knob in to stop the fill, but continues to fill for 30 more seconds. I found water on the floor ...
Kenmore 80 series makes noise in sping cycle I have a Kenmore 80 series model 110.16882502 washer that suddenly started making a clunking noise in the spin cycle - sometimes. It does not seem to do it
...Series will fill, but nothing else The machine will fill with water but then completely stops. Won't go throught the cycle, no draining or rinsing, no spinning. I've tested the outlet and it works ...
Kenmore 700 series top load washer problem Washer wobbles and vibrates in spin cylcle. Problem just started and have tried levelling washer, realigning clothes but problem persists. It does this every
...Kenmore Series 80 Super Capacity Plus Quiet Pak Model 100.26842692 If the bottom agitates and not the top, the problem is likely the 4 "agitator dogs" designed to allow the top agitator to turn only ...
...Kenmore 100 series. It will start to fill with water, but as it begins to wash will just stop with the green was light on and do nothing. The top doesn't lock throughout this time. When opened, there ...
Question about 24032\24036 Top Load Washer
Kenmore washer 70 series mod# 110 22722 100 won't spin after rinse cycle. I have to push the timer OFF then pull ON to start the spin cycle. What can I do to fix this problem. Thank, call a repairman ...
Question about 24032\24036 Top Load Washer
...Kenmore Series 100 top loader washer that only fills up with about 4 inches of water and then starts washing. How can I get a full load of water? Unfortunately, that is going to be the regular input ...
Question about 24032\24036 Top Load Washer
Series 100. Why does it have to be reset frequently before starting? If the washer was stopped before the cycle was complete, the controls lock up.
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions