Kenmore microwave Keypad display shows -F2-. Unplug unit for 20 minutes or so and microwave will work fine for a short time. Keypad display then goes back to -F2-. If this has a controller that runs a
...microwave on top. I can help but I need a model number Kenmore are made by many different manufacturers of their appliances.. F2 error is most likely a oven sensor problem . your over sensor has to ...
Question about Elite 21086
...kenmore elite microwave touch screen? I have a kenmore elite microwave.. 1 year.. it worked this morning. and now for dinner.. its not working.. how did you fix your problem? Donna [email protected] ...
Question about 63662 / 63664 / 63669 Microwave Oven
F2 WArning light on Kenmore Microwave oven My microwave shows an F2 warning light and none of the buttons will work. The light bulb already works, so this isn't the problem.
...Kenmore Elite Speedcook microwave model 63792-The display light beeps every few minutes and stays on rather than dimming after use. I unplugged and a message "call Service F2" came up-I used the ...
Question about 63792 Microwave Oven
Kenmore microwave model 63792 displays F2 error message My Kenmore model 63792 microwave displays an F2 error message. Can you tell me what this means? The F2 error code on your microwave oven is a ...
F2 error as well This is a Kenmore Elite 665.63792 bought nearly 2 or 3 years ago from Sears. Rather expensive. DIsplay is on. Buttons are 'functional' but nothing works really besides the timer which
...F2 Kenmore Elite speedcook oven Model 63799. F2 displayed after the touch screen wouldn't automatically shut off and touch buttons below wouldn't work. What does F2 mean and are their major problems ...
...microwave and an oven, then the problem F2 means a temperature related fault such as a bad temp sensor / thermostat or a defect in the control board. If it's just a microwave, then the problem is ...
Question about 30464 / 30465 / 30469 Gas Single Oven
Kenmore microwave model 68680/12 is displaying code F2. Nothing on the control panel works. Call the 800 # for Sears service. They should be able to tell you what that code is for. Bad key pad or door
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions