Questions & Answers for: kenmore ice maker arm stays

...Kenmore Elite Trio French door refrigerator - this is made by LG Electronics Based on Harvy's and others' comments, here is what I did: 1) Turn off the ice maker for 10 or more hours and remove the ...

Ice maker my ice maker wont make ice, makes clicking sound The ice maker will not make ice. The part that goes down to release ice just stays down. Hello Carol34, I'd like to help you but you will ...

Ice maker won't stop making ice frigidare bcm95 If your shutoff arm stays up, the switch inside is bad. Usually have to replace the entire icemaker. Send model # from tag on fridge for part lookup. ...

...ice maker that will not shut off It appears that the metal arm is connected but has no effect on the ice maker. If I lift it it will not stay up nor will the motor stop cranking. Any thoughts on what ...

kenmore ice maker not releasing ice - it stays in the bottom and ice maker makes sounds like it's trying to kick it out but doesn't. It's frozen in a big block. Sounds as if your water valve is ...

...ice maker. I have a Kenmore upright refrigerator freezer, with the freezer on top. I don't have the model number, as it has been rubbed off the inside of the refrigerator. I don't know if that is ...

ice maker will Kenmore Coldspot side by side. The ice maker will make ice but I have to push the cut off handle on the ice maker down after everytime it makes ice if not it will not dump the next load

...Kenmore purchased in 2003 Good day, Remove the ice maker and make sure the wire that is the shut off arm is inserted into the slot correctly. If it is, the you can either replace the front module or ...

Ice maker automatic shut-off arm will not retract on my Trio The ice maker automatic shut of arm will not retract and when I play with the reset and the ice cube tray, the tray starts to turn from ...

...KENMORE 79571302.012 STOPPED, THE SENSOR arm stays in the up position. I might be able to fix it, but cant figure out how to remove the icemaker. Sears is on no help 2 screws in front were easy, but ...