Questions & Answers for: kenmore elite dishwasher broken door

...kenmore elite built in dishwasher I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:- ...

...broken on my dishwasher and will not support the weight of the door. The door falls quickly to the down position and could possibly cause injury. the door links are broken need to get new ones and ...

...Kenmore Elite dishwasher (SEARS part number 8558128) will not stay closed. The little latch mechanism appears to be working, but the spring on the lid's base keeps the lid wide open at all times. I ...

...Thanks Rylee My model was a Kenmore 17574 Elite and the reset sequence is as follows: Hi temp Scrub Air Dry Hi Temp Scrub Air Drybut thanks for the start of the solution it was extremely

...to the ground. Has a spring/cable broken, It is a Sears Kenmore Elite model # 16984200. Can you tell me the part cosdt for the item? Thank you. This is part number 8194001 and retails for around ...

Plastic part connected to door spring is broken. Where can I buy the part? Kenmore Elite model 665.1315 From sears

kenmore dishwasher elite door opens too fast, broken spring? Could be that, the spring may have unhooked or it could be a defective damper connected to the door. Remove the side panels and check the ...

kenmore elite dishwasher no power no power to pad , has power at box 1) Test the fuses blown or c.breaker reset.2) See for any wires broken, burn, or loose wires repair.3) test the switch door, if are

kenmore elite dishwasher model 665.16493300 door falls to floor when opening Door springs are located at the left and right side of the door bottom. You will have to pull the unit a few inches from ...

Kenmore Dishwasher dropping out pieces of black insulation on the floor and into the dishwasher basin. What is it? Can the insulation be replaced or is it new dishwasher time? I started finding small,