Questions & Answers for: kenmor stove solving

Kenmore microwave shuts off after several seconds Problem is two fold. Our Kenmore microwave model # 721.80592 fan started running for extended periods, when not in use. Problem seemed to arise when ...

Kenmore Oven Mod# 665.75012104 The oven works sometimes, the igniter clicks four times but nothing happens. If you get lucky it may light the first time but not relight during a cycle. The broiler ...

F7 Code on the Stove Top Burner I cleaned the stove top with the knobs off and F7 code came up for all 4 burners and doesn't power up.... the oven and the surface warmers do work however. Please help.

Oven won't heat We recently moved the stove. The burners work fine, but the oven won't heat up. Bake -150*, Convection 200*, Clean 200*. The display works properly. Is there more than one gas valve? ...

Kenmore stove surface unit light stays on light stays on when all control knobs are off YOU HAVE A SURFACE UNIT SWITCH GOING BAD take off the back and look at the switches if you have a volt ohm meter

The electricity in the kitchen went out, now the oven won't heat. The electric pilot is glowing, the stove burners are working, but the oven will not light/ good day, hope this link below will solve ...

Kenmore KGSA906 display shows unplug meat probe when probe is not inplace and now we dont have any oven use Have plugged probe in and removed but to no avail. also have stove beeping every 3-5 minutes

Electric stove fuse keeps blowing I have a 30+ year old Lady Kenmore electric stove that I am quite attached to. Recently while making pickles, I spilled a good amount of water on one of the left side

Periodically, front burner jets on my Kenmore Model 790,7250 become weak and just as unexpectedly resume at full blast. Why? How can the problem be solved? Here are the model numbers on the Use/Care ...

...on my stove and how do you fix it? What make and model stove is this? For Frigidaire ranges (and Kenmore and other branded ranges by the same manufacturer), F13 indicates a problem with the