...3100 V6, 130,000 miles. Runs very well except when you start the engine after it has sat overnight, it starts right up, but shifting into gear, the engine almost wants to stall, then if you step on ...
...3100 V6 is prone to having bad intake gaskets. Causing loss in coolant, though its not overheating keep an eye on the coolant level, and have them checked soon. Is there a follow-up on the condition ...
...3100 V6. I was wondering if the catalytic converter can cause said problems above. Also I checked the temp before it and after it, before it the temp is around 460 degrees and after it is about 350 ...
...3100 V6 SFI ) The only time i get fan to run is when i pull connector off cooling sensor. change this sensor twice to be shure. sensor has voltage on it about 5 v bench test fan also works fine. When ...
1994 OLDs Cutless 3100 V6 Keeps blowing fuese D Electric fan, Generator, DRL Module Then get Codes 14,21,22, 24,25, 27,34, 51, 55. Replace fuse and it drives fine until you stop. When you take back ...
...3100 engine has had three engine failures\r\nanti-freeze in oil replaced first engine second time engine was rebuilt Sounds like the head gasket. See if it has any warranties on the rebuild to have ...
...3100 and should bolts be dry The bolts should have thread lock on them when installing, and the torque is done in 2 steps. 33 ft lbs. and then 90 deg. after that on the second pass. 3.1L Engine ...
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
988 Questions