Questions & Answers for: jvc vcr hello wont turn

...jvc compact...F5-577. we were watching a movie, used the remote to turn it off. came back and can't eject any of the 5 discs because it is locked. all by itself. i tried holding down each of the play ...

hello, nothing is shown on the TV, and it turns itself off within 30 seconds. Solution, I am returning this JVC unit and never purchasing another JVC product again. Complete failure after one days use

...jvc dvd player/vcr will not eject disc says its reading but wont play or eject You might want to check the thin ribbon cables attached to the dvd inside the unit, pull them out and slip them back

jvc vcr i followed the instruction in the manual on how to set the jvc vcr to auto clock. when i turned off the vcr it just kept blinking auto forever When you have it on VCR mode you can bring up the

...JVC DVD/VCR HR-XVC11B recorder combo. I hooked up all the wires correctly (according to the manual), turned it on with the remote to VCR, clicked 'set-up' and nothing happened. Now what? I read the ...

wont show the menu on screen unplug vcr for about 30 sec. and plug back in. this worked for me and my jvc vcr good luck, roadstarman

...jvc dvd/vcr combo using my bigeasy one for all universal remote urc3300 please Hello Four digit universal remote codes for JVC DVD/VCR combo are 0418 0900 Direct Code EntryPress and hold the SETUP ...

jvc-drr-mv100b stuck at hello message. dvd door also not opening. have turned it off and unplugged without benefit Possibly Cap C127 on PSU is bad. This is my problem. See http://www.fixya.com/support

JVC DR-MV80B display says hello then shuts itself off. I also tried to open the DVD tray and the hello appears and I hear the dvd player like it wants to open but wont then unit powers down. I opened ...

...JVC VCR HR-VP78U, and here recently I was watching T.V. and the power just turned off and will not turn back on I believe the fuse is still good because there is power it just wont turn on, not with ...