Question about HX-D7 DVD Compact Stereo Audio / Video System with 5 DVD Changer Shelf System
...jvc stereo set, it turned out the two cables of a speaker were touching each other. dont shut the unit off EVER treat this machine like a computer and you will have years of listening enjoyment check ...
Error message No Disc JVC Model MX-J206 Once a CD is inserted it won't play. An error message appears" No Disc'' Any solutions? Unit has bad disk t-table motor Check and fix the ground wire
jvc model no.ca-hxd7 system no. hx-d7 i turn power on and message appears on the screen that says "protect" and then the system powers down Check back speaker wires! this is protection mode! There is ...
...wiring diagrams to the trucks wires, install manuals, etc, I'm fresh out of ideas. the stereo is a jvc kd-sx840, and te truck is a ford ranger 96, 4 cyl, please contact me @ [email protected] ...
Question about KD-SX840 CD Player
...JVC kw av 60bt deck ,message -check for safety behind with your eyes Did the vehicle come from the factory with a jvc stereo or did someone install it ?If the stereo was not installed ...
installing JVC KD-R740BT in 1997 Ford truck, keep getting "miswiring, check wires and reset" message Check speaker wires. All four speakers must be independent. Means no shorting to chassis.
check antenna message appears bbc channels cannot be found and on the other channels it keeps reverting to the "check antenna" message As the set indicates, check the connection to its antenna. Check ...
Question about KD-HDR1 CD Player
...jvc kd-r45 it keeps on saying warning unit check wiring then reset The check wiring message suggests a short probably in a speaker wire. Check that the terminal leads for the speakers are properly ...
...JVC R920-BTS. I havent hooked up any speakers yet cause all I'm getting is a message saying miswiring. I have checked the wires and the fuses and it all looks good. What would be causing this to ...
Question about KD-HDR1 CD Player
JVC kdsx24bt is throwing out a miswiring message after i wired it up, the first time it worked fine just no sound. Then i turned it off and back on and got a miswire message DISCONNECT THE SPEAKER ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions