and thanks. Mo I don't expect a 2 channel amp would have a digital input such as optical. More likely you would be able to pull analog stereo (red and white RCAs) off the Panasonic and run to the JVC
TV and the HDMI input cable often solves the problem. Testing - Unplug all the HDMI inputs from the TV. Turn on the TV. Plug in the HDMI inputs one at a time. The cable that causes the TV to enter the
green screen Feeding a digital signal to n analog input will do that
tv in the same way (through the PC input) and select PC input I don't get a picture. Any suggestions? Hi Before connecting it to your Tv try to turn down your resolution settings on your laptop to 680
...TV channels do the following: Connect the antenna connection to its antenna in at the back panel. Automatically searches and adds available channels to the memory. Select "ANT in" Select Cable or ...
...is no option in the TV's menu to select the laptop as the input connection type. Any way of changing this? Just select the input button on the set, or the remote until the input your on is
pc connection to tv If the TV has a VGA input then you can connect your computer to the TV using the TV VGA input.
...TV. You can use the analog L & R audio inputs for a very similar sound from the TV speakers. The digital multi-channel audio (Dolby Digital, THX, 5.1, 7.1, etc) encoded in the program should be ...
Question about VIERA TX-L32E5B 32" LED TV 1920x1080, 100 Hz, Freeview HD, HDTV, LED Backlight
...JVC TH-A35 is hooked up to my TV via a scart adaptor supplied to a dedicated AV1 input. I get backgound sound but no speech or dialogue. Help! you are trying to reverse the dvd and it will not ...
Question about Viera TH-58PZ700U TV
...signal by using a converter box. Replaced the DG board with no results. The analog ic on the main board is dead. Change the main board. Good luck, Serge. Tv repair expert technician mumbai - ...
Usually answered in minutes!
457 Questions
346 Questions
268 Questions
236 Questions
213 Questions