Questions & Answers for: jura tray stuck

...tray (JURA J5) keeps indicating that it needs to be emptied inspite of it being empty. How can i fix this problemo? Thank you. The connectors at the back have liquid on them use a lint free cloth to ...

...tray" displayed (Jura Compresso Impressa S8). I removed the tray, cleaned it, replaced it, but the message remains as "empty tray" and I can't get past this step. I've tried turning it off, replacing ...

tray is slid back into the unit after emptying. Try putting a container under the coffee spouts and pressing the rinse button. This will usually free any coffee grounds that may not have been expelled

Jura Impressa 27. The tray, for some odd reason, was not going back in. I simply tried it without the top part - that receives the grounds - and was finally able to get it in. I pulled it back out and

...Jura machine. Try this first: Try pulling out the tray. Then let it dry out for a day or two. Then when starting it up, while the mechanism is running, try tapping the sides of the machine to get any ...

...Jura machine. Try this first: Try pulling out the tray. Then let it dry out for a day or two. Then when starting it up, while the mechanism is running, try tapping the sides of the machine to get any ...

tray in an Ena 5 stuck as the waste Shute which comes down inside the machine got caught inside the tray. Managed to get it out but now cannot push the tray back in as the chute gets in the way. All a

jura z7 error message empty coffee tray when tray s not full error message to empty coffee tray when the tray is not full Yo James, I know nothing of your unit, but I've never let that stop me before?

...Jura machine. Try this first: Try pulling out the tray. Then let it dry out for a day or two. Then when starting it up, while the mechanism is running, try tapping the sides of the machine to get any ...

...tray To reset your Jura S8 coffee machine and remove the stuck drip tray, you can try the following steps: Unplug the coffee machine and wait a few minutes for the internal components to cool down. ...