Questions & Answers for: jura impressa shut

Jura Capress Impressa E8 My machines drawer won't go back in place. Any ideas? Open the drawer and take out the box for the grounds. Run a rinse cycle and it should now go back into place. shut down ...

...Jura Impressa E 80 Cappaccino machine. It is a and 1/2 years old. After machine stopped working and after a regular maintenance scedule I cleaned and descaled my machine (even though there was not a ...

Jura E75 After I turn on unit it flashes "please wait' for a couple of minutes then switces to "malfunction 5" or possibly it says "malfunction E". Prior to the problem I had cleaned the water tray. I

Jura capresso shuts down My S8 turns itself off, as if a circuit breaker in the machine just "trips" and the machine shuts down, just as if the electrical supply cordwas unpluged. The machine is not ...

...Impressa E35 will not continue past the open/close tap prompts. I'm not able to get to the 'rinse unit' or 'select product' choice. I have shut it off and still the same. I suspect that the unit is ...

jura impressa f9 malfunction 8 i need help whats that Malfunction 8 means that the brew unit can not get in the right position in the right time. This is usually because the brew unit is full of old ...

the S9 has been unused for three months and I cannot get it to get water to the brewer. It keeps telling me to fill the water and press the steam button. No such luck. Is there a way to prime this ...

...If I shut the machine down and restart it, it indicates that I need to descale as if nothing happened. Hi Mr Don i so happen to have this same problem with my Jura please advise on your solution ...

jura coffee machine you'll need some special tools that I will talk about as I describe how to get to the sensor, make sure you get those tools or something similar. The problem that you are having is

How can I clear 'Remove Finger from Display' message? I have tried turning it off and on, holding the power button and unplugging the unit. Put your finger on and take it off. maybe the touchpad is so