Questions & Answers for: jura coffee machine drawer back

Jura Capress Impressa E8 My machines drawer won't go back in place. Any ideas? Open the drawer and take out the box for the grounds. Run a rinse cycle and it should now go back into place. shut down ...

machine dry out overnight. Before I turned it back on I removed the drawer and wiped the area inside the internal flap then I used the pressurized air that you use to clean a computer and blew out all

...coffee came out. Now something inside is preventing pushing the drawer in Take out the used grounds container, and put the drawer back in the machine. After the machine has finished positioning, then ...

machine stuck and can't put drawer back in. i may have opened the draw during the shut off process If the drawer is stuck and cannot be put back in then put everything back except for the coffee grind

Jura E8 in order for the "missing drawer" light to go off. I've unplugged the unit to allow chip to reset... nothing. I think the elevator is stuck thus causing the drawer to not go in place

...make any coffee. I had the same issue. Had to send it to Jura to be repaired. Cost $235.00 and they cleaned it and sent it back. I was not able to fix it myself. They said there was a major

jura capresso e9 water not coming through spout when machine is turned on. no water comes out of spout, it leaks into the drawer Use a pin or a needle on the spout to clean the nozzle head. Most of ...

...machine appears to be in middle of an action. But we can't reset. For Jura F7 Series, "Tray Missing, can't put it back in". With a small flashlight, look in to the cavity which the tray ...

...coffee machine is built in and not your brand but our problem related to a sensor at the back of our tray which had broken off we found it and glued it back on which worked for a little while in the ...

...coffee grind drawer after emptying That would normally mean that the brewing mechanism is not in the at rest or start of cycle position. Take the bin off the tray and see if you can slip the bottom ...