Questions & Answers for: jumpers sata

Ad

Question about Computers & Internet

6 Answers

...SATA II drives do have jumpers to make them backwards compatible with 1.5 Gb/s (SATA II drives are 3.0 Gb/s). So if your system is older and can only handle SATA (first Gen) then you have to add a ...

Ad

Question about MaxLine Plus II 7Y250MO 250 GB SATA Hard Drive

2 Answers

...drive order is determined by what SATA port they are plugged into, or by the BIOS configuration. slave drives typically have no jumpers at all and master drives have a jumper vertically on pins 1 and ...

Ad

Question about EP-8K9A7I Motherboard

1 Answer

Epox motherboard and SATA disk I have Epox KT400A and it does not see sata II disks. I put jumper on HDD to switch it in sata I mode and MB doesn't detected it. Disk is WD1600AAJS. It was same with ...

Question about ECS PM800-M2 PM800 P4FSB 800 Supports Intel Pentium 4 Processor (REV:1.0) (ECSPM800M2V10) Motherboard

3 Answers

i can detect no SATA' HDD The ECS PM800-M2 only supports SATA 1.0 hard drives. If you are using a newer SATA 3.0 hard drive, there is a jumper on the hard drive which has to be set to SATA 1.0 in ...

Question about Caviar 500GB Internal SATA Hard Drive

1 Answer

...SATA Drives do not need jumpers to set primary and secondary drive positions. Each sata drive gets it's own connection to the motherboard. Check you motherboard diagram, and make sure the 320GB drive ...

im just about to buy a SATA II 500GB hard disk for this MB, i need to know if this would be compatible with the MB??! Thanks SATA 2 (SATA 300) is not backwards compatible with a SATA (SATA 150) ...

Question about WD Caviar Blue WD3200AAJS - hard drive - 320 GB - SATA-300 SATA

1 Answer

jumpers are for slave Western Digital WD Caviar Blue WD3200AAJS - hard drive - 320 GB - SATA-300 SATA SATA drives don't need jumpers. Just install the drive and the computer will assign a drive letter

Question about Dimension 3000 PC Desktop

1 Answer

my sata hard drive and do I need a jumper on sata hard drive and what setting would the jumper go on A sata drive doesn't need jumpers. The jumpers were only required when 2 drives used the same cable

sata cable & pata cable have a any jumper setting Hi, The hard drive / optical drive have jumper settings, not the motherboard. PATA has jumper settings, but SATA do not require any. The diagram ...

Question about WD Scorpio Blue WD2500BEVT - hard drive - 50 GB - SATA-300 SATA II

1 Answer

western digital wd2500bevt slave jumper settings Which jumper setting is for slave SATA drive position is determined by the plug on the motherboard, not a jumper. Jumper settings are for PATA drives ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18513 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...