Questions & Answers for: jumpers p4p800

...P4P800-E board that I currently have and I have lost the manual for the motherboard aswell. be sure sata is enabled on the bios, install sata drive driver, this is for your computer to detect a sata ...

...MY BIOS ALWAYS RESET EVERTIME I TURN ON MY COMPUTER.EVEN I REPLACE NEW BATTERY IN C-MOS cheak jumpers pins 12 normal mode 2 and 3 pins set them on that cleaers it out for 20 scec then back on 1 ...

Problem: set wrong jump Cmos Pls help me solve the prolem : set wrong jump Cmos,time not update that some time appear when start my computer - press F1 to enter setup, Press F2 to load defaut...Help ...

...same problem but I fixed this problem, You will feel stupid when I say you the problem: F*cking Jumpers! Just put a jumper to your Hard drive ( if it is western digital put to 7-8, you will see ...

...P4P800-VM mobo. It is password protected, but I can not remember my password. Help! There is a blue jumper located just below the lithium battery on the motherboard. You need to remove the jumper and ...

...jumpers on an Asus p4p800 mb and now USB is hosed. Should I clear the cmos? Yeah, I would, but READ YOUR MANUAL. There are several jumper settings that can be changed. Just be careful and you should ...

I am going to school for computer networking... and in one of my classes they asked us to find out " What are jumpers?, How do they work?, and what do they do? " Go to this LINK.

I get a pb with BIOS. I change the battery of BIOS and now I can not even acceded to BIOS : DEL doesn't run. I change jumper for ten seconds : not better DEL doesn't run. Yesterday the bios charged ...

I get this Chassis Intrusion Signal and the system halts... I just dusted off the fans, the jumper on the chassis signal is in default position... Don't know what to do... You may want to check to

j ai beaucoup de probleme avec mon desktop p4p800-mx chassis intruded Probleme You have a problem with the Chassis Intrusion part, of the Asus P4P800-MX motherboard? ...