...diagram in the manual or quick reference guide to determine the identity of each set of pins. The good news is that the jumpers from the front panel almost universally have ID markings these days. A ...
Question about eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop
...words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on
...that I have a CD rom on my computer. May be the jumper setting is not correct and is not matching with ur harddisk.There is a diagram on the CD drive or the harddisk.try setting it
diagram.svg (You can also type, 1) Northbridge (computing) 2) Southbridge (computing) in Wikipedia's search box to obtain more info ) How to find out what motherboard chipset the eMachines W3502 uses?
...hd) here is the jumper settings http://www.wdc.com/en/library/eide/2579-001037.pdfemachine manual ...
...diagram showing where the jumper is placed to make it the SLAVE. As far as figuring out which is which (MASTER .vs SLAVE), the MASTER is the last drive on the cable. I hope this makes sense... Good ...
...settings by:Open the PC case and look at the mother board.Look for the jumper setting which will be similar to the one in the diagram below and usually situated close to the CMOS battery. ...
...jumper switches, which fit onto pins. There will also be a diagram on the drive somewhere. Look for CSM C= cable select (let the computer choose which is which. M= Master, which means you set that ...
Usually answered in minutes!
5,018 Questions
345 Questions
167 Questions
141 Questions