Questions & Answers for: jl low ohm light

...jl 500/5 amp the yellow low ohms light lights up when nothing is plug in except the 12v power and ground and remote any advice what dose this mean is it an internal problem or what thanks Dustin is ...

...low ohm light comes on im runing a 1000/1 jl audio amp , 2 w6v2 and a 1.2 farad cap and 4ga. wire slot ported box. help i dont wanna spend the money to get this fixed How are the speaker wired and ...

Low ohm light System worked untill i moved it from one car to another car when i hooked it up the amp turned on then like 5 seconds later the low ohm LED came on and the subs were making a fuzzy sound

jl audio 1000/1 amp low ohms light came on !how do i get the amp to reset disconnect power and remote for 15min

...low an impedance. Make sure your amp is capable of driving the speaker load you have connected to it. Ohms is a measure of the speaker's impedance. Lower ohms means higher load on the amp. Using a ...

JL audio amp and 2 10" w6 subs. When it is hooked up in 2 Ohms the low ohm light illuminates. When I hook up one amp at a time the light does not come on. what do I need to do to have both hooked

...low ohm light on the jl 1000 lights up I need to no how to wire them in series. I called Jl audio shop they told me and I wired how they said they still pop So what should I do to check them now I ...

low ohm light stays on my jl 1000/1 you have your amp wired at too low of an ohm load for the amplifier. This is why it is doing this. Jl amps are awesome and pretty much make everything idiot proof. ...

...low ohm light is on when the unit is turned on. even with no speakers and input signal connected. the unit has been working fine for 4 years of very light use. but now its gone "bad" the system does ...

jl audio 300/4 low ohms light wont go off If the low ohms light is on then you have your speakers wired to low. I need to know some more info like what type of speakers you have running on this amp ...