...results. screwed all the way in will not shut the bike down. I'm lost, please help sounds like a jetting issue. change the main jets starting from the largest one you own and work your way
...WR450 08,after a dusty ride carby always has dirt in the bottom. Some times this has entered the jets and caused erratic or no idle. The air cleaner is always cleaned and oiled, and there is no ...
...rhino 450 cuts out at high speed 30mph used to get almost 40. Has after market cdi kn air filter rejetted 2 richer. runs great slow to mid range even full throttle in sand is good...just high
We have a Yamaha WR450. We warm up bike and once we push the choke in the bike stalls. Try to fix your jetting by making the fuel and air mixture richer or you may need to clean the carburetor.
...jet it but still bogs down in the low end and idles like it wants to die. issue with the needle valve? i cant figure out if it has too much air and not enough fuel or visa versa. any ideas? try it ...
...Air fuel mixture adjustment too lean. 3. Pilot jet clogged. 4. Faulty accelerator pump. 5. Float level too low. 6. Float bowl contaminated old fuel, water, dirt, rust, etc. 7. Float bowl vent or ...
...jet helped but didn't eliminate, there are 3 types of test on the t.p.s. 2 of them passed the 3rd didn't tell me how to do the third test, if im doing it right Hi, Gerard and the usual ...
Question about 2004 WR 450 F
jet mixing well nozzle, or the air-fuel mixture screw is adjusted too lean. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good
...jet, and air jet. 5. 3/4 to wide open throttle is managed by the main jet and air jet. 6. Wide open throttle is managed by the main jet. If you are running lean, spark plug electrode color is white, ...
Usually answered in minutes!
66 Questions
52 Questions
43 Questions
1 Questions