...microwave, JEM31, about 5 years old. I put a rather tall bottle of maple syrup in to heat it up (removed the cap). It caught fire, as did the plastic inside ceiling of the microwave. Now the burned ...
about that burned microwave The link you provided doesn't work. Sorry Let Me Try It Again Click Here To Order Parts From Ge.
Where do I find model number on G E microwave ? Hi, Here is a web page from G E appliance website which may help you: http://www.geappliances.com/finder/microwaves.htm Best wishes, Graemevm
JEM31 microwave works intermittantly. How do I replace/tighten the bulb. In there models, the cavity light is located in the magnetron cooling duct on the right side of the chassis. You need to remove
My JEM31 is 5yrs old. Went to reheat a dinner and it made a noise, all power shut off. I unplugged it, let it sit for an hour then plugged it back in. Lights came on, it's working but makes a horrible
...JEM31 microwave stopped working and makes a loud groaning noise. Is it worth repairing? It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage ...
What does F4 mean for the GE Micro JEM31 "F4" on a GE is normally a defective humidity sensor. There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on
jem31 no heat The problem is in the magnetron or the inverter board if under 7 years old. Cost to repair will be equal if not more than a new microwave oven.
How do I remove cover on JEM31 microwave Remove the screws on the back of the cover. There might also be some on the sides. The cover should slide backward and/or upward after the screws are removed.
Question about JEM31 Microwave Oven
...Jem31 microwave. There are only 3 screws on bottom and the back screws at the bottom are star shaped with donut around a peg. You need a special screwdriver to get those star shaped screws out. I ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions