Question about 1995 Wrangler
horn of my 1994 Jeep YJ and they are disconnected and just hanging on the other end near the firewall. I would like to know where they are properly suppose to be connected. I could "rig" something but
...Jeep Cherokee = Horn doesn't work Can I replace the horn? And where is it under the hood? I'm a short, fat, old lady but willing to try. The horn is normally right in front, under the radiator, or ...
horn on a 1998 jeep cherokee classic? It may be that the horn is bad or the fuse or even a pinched wire. I would start by checking the fuse and relay. Second check to see if any wires are bad and last
horn not working. Fuse is good. 2005 Jeep Wrangler. How do you remove the rubber cover on the sterring wheel to get at the horn. May be bad horn. Get a 12 volt test light or multi-meter and attach to ...
...Jeep Wrangler's horn hasn't worked since I purchased it. I tried switching out the fuses in the power distribution box, but with no results. Any help with this????????????? we have a horn, a ...
...horn 2007 jeep grand cherokee how do you remove the old horn? 1Buy a horn kit. Direct replacement kits for the Jeep Grand Cherokee models will have only one horn, but many aftermarket kits consist of ...
...jeep wrangler sport Horn stopped working on my 2004 jeep wrangler. Relay is working under hood and clicking when pressing horn button. I have 12.56 volts at the plug going into horn. I have tested ...
...horn on 2005 Jeep Wrangler? how to fix a horn on the work bench or how to diagnose a dead horn on car.? my guess, #2 TJ car. here is the list; do not fiddle wires near horn sitting at steering wheel ...
Question about 2006 Wrangler
...horn 1980's Cadillac solution into my 2008 Jeep Wrangler JK. Can I use existing wiring back to horn button in steering or do I need to add a relay. add a relay as the horn button will not carry the ...
Question about 2006 Wrangler
...Jeep the horn Works, when I Hit the panic button, the horn works. The horn also works from the alarm being set and from the panic button. I’ve replaced the TIPM AND clock-spring. No power at either ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions