...janome.com/documents/File/ManualFile/423S_Instr_book.pdf i hope this of some help to u..All the best Have a nice day! tc I got my machine back from the repairman for the same issue. Check the two ...
...janome brand and checked needle size.Any ideas? Unusual for this machine. Check to be sure the needle is inserted with the flat side to the back of the machine. If it is, remove the needle plate, ...
Question about Memory Craft 9000 Computerized Sewing Machine
bobbin keeps balling up. I have taken everything apart and cleaned it out. I have changed the bobbin and needle. What else can I do I would suggest a new bobbin casing, yours maybe damaged. Also, you ...
...sewing on my machine, the bottom thread continues to get botched up. I have taken the bobbin out and replaced it many times, but nothing changes. Any advice? Check that the thread is tight around the ...
Question about Memorycraft 6500P Computerized Sewing Machine
janome memory craft 6500 sewing machine...all of a sudden, the bobbin thread does not attach itself to the needle thread...i have taken off the plate, cleaned out the dust, rethreaded both top and ...
Question about Memorycraft 6500P Computerized Sewing Machine
...taken bobbin case out and cleaned it, but after about 3 stitches the thread gets caught down underneath sole plate Check your bobbin and shuttle carrier for burrs. If you find them use fine grit sand ...
...Janome Mini, It sewed beautifully for 6 months. I didn't touch it for 6 months and when I went back to it, it just jammed in the bobbin case. I've rethreaded it, taken it apart and ...
Question about Harmony 2039 Mechanical Sewing Machine
...taken the metal plate off to check for bits of cotton with nothing at all found. This machine although some years old has only been used less than a dozen times. Can't afford to take to a ...
Question about DC1050 Sewing Machine computerized machine
Janome work great almost through a whole quilt then stop working at all? It sews fine for weeks, then stops sewing. Makes a screeching sound and has thread everywhere on the bottom side. Won't sew one
Question about Memorycraft 6500P Computerized Sewing Machine
...JANOME 6500 MEMORY CRAFT I HAVE THREADED IT AGAIN SEVERAL TIMES. I HAVE CHANGED THE BOBBIN AND THREAD. I HAVE TAKEN THE BOBBIN CASE OUT AND CLEANED OUT WITH CANNED AIR AND Q TIP. I HAVE CHANGED ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions