Questions & Answers for: janome communication port

...tries: "failure to initialize communication port". Can you help? Thank you. Did you click on the computer to sewing machine button under the display? It has to be in that section to accept

janome customizer 2000 reader/writer when I try to write designs from my reader-writer customizer 2000 it tells me -failed to open serial port,my port is working properly hi i have found a solution to

...communication settings and change baud rate to a smaller # until you find one that works. I have the same problem with mine. I have tried everything. Baud rate, com port, new cable, asking Janome... ...

...Janome 9000 as useless. I am having the same problem with the Customizer 2000. Worked before but now I get a "communication error". I'm thinking the problem is with the cable. You mentioned you got a ...

...port to use. To do this, open Customizer (either EasyEdit or EasyImport) and click the "ScanCard" menu item. Choose "Communication Settings" in the drop-down menu and then choose "COM4" in the ...

Communication error for Customizer 2000 I have a Janome 9000 which uses a scan card to write a design. Just recently when I wanted to write to the scan card I got the message "communication error" I ...

...Janome UK said they could not help and were not interested, I asked them if they sold a new cable for the reader with a usb cable on the end rather than the serial port. I am getting rather desperate ...

...communication is to the "COM Port" designation within Customizer/Digitizer. Go to  >ScanCard  >Communication Settings >  choose the COM Port you want to use (find out what COM ...

...Janome 500e embroidery machine. When I connect my usb cable to my pc and the machine-I get an error stating he cable is not connected.I have double checked the connection on both ends. First try a ...