Questions & Answers for: jandy transformer

Question about Lite 2 Natural Gas Pilot Light Heater

1 Answer

...Jandy Lite 2 LG model is not firing up when turned to On position. It was working on one day and later that night it stopped working. Since then, it will not come on ok 24 v at the transformer is yes ...

Ad

Question about AQUALINK RS TELELINK KIT

1 Answer

...Jandy Aqualink RS system. The wires for one of the valve activators was shorted and the outdoor control panel and the indoor control panel lost power. None of the circuit breakers was tripped. On the ...

Ad

Question about AQUALINK RS TELELINK KIT

0 Answer

...jandy LRZ electronic propane pool heater, 175,000 btu I am trying to start the heater up after winter. The gas in on, water flowing, power to the unit, but the control pad displays will not light or ...

Question about AQUALINK RS TELELINK KIT

0 Answer

...jandy # 8265 will not turn on. I replace the battery and still dont work. if voltage coming in check transformer if 24 volts at back of PC board need new control board if no voltage replace ...

Question about AQUALINK RS TELELINK KIT

0 Answer

...Jandy R6 outside control box. I moved into this house 3 years ago and noticed that when the temperature outside gets to around 80 degrees, my inside and outside panels go dark. Only when the ...

Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas

0 Answer

jandy heater service manual check power in if ok check transformer if ok check gas pressure if ok check safety circuit if when firing voltage to gas valve brown wire check ignitor

Question about LAARS LX250 - NATURAL GAS, DIGITAL READ-OUT, LOW NOX

0 Answer

Where is the manual reset on jandy lx 250- l pool heater no reset if popping breaker shorted ignitor if no powe see if power coming in if ok check transformer

Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas

0 Answer

jandy heater circuit board loses power check 24 volt transformer

Question about Laars LX Pool Heater / 400,000 BTU / Natural Gas

0 Answer

Jandy ei. No output reading if voltage coming in check transformer

I have a Jandy lite 2 model # L J325NB Now it starts normal. Runs for 1 to 5 minutes then shuts or powers off with no input controls on the display except the 1 14 showing bad transformer check ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...