Questions & Answers for: jandy aqualink keeps turning spa

...aqualink. Pump Jandy filter and pump with a aqualink. Pump won't turn off even though it says filter is off!! Once you turn it off their will be a heater override that will keep the pump running for ...

...AquaLink RS8 keeps randomly switching itself to Spa mode from Pool mode during the programmed pump cycle. Will also sometimes switch itself back again to Pool mode. Almost always happens during the ...

I have a Jandy Aqualink. The spa jets keep turning on. remove spa side remote plug see if it continues if not replace remote if it continues check for programs

...jandy pda system resets itself to default settings (turns off pump etc..)and date/time to 09/08/06? I reprogram and it works for a few hours. What do I do to fix? How about the battery in the ...

Aqualink RS4 keeps turning on and off even though all programs have been cleared. This issue sounds tricky. I recommend you callthe Jandy technical support at 800-822-7933 and they should be able to ...

jandy pda time keeps resetting back to default and the spa blower will turn on and off by itself Time resets to default and spa blower turns on and off go to system set up see if programs if you have ...

Jandy Aquilink control panel keeps tripping circuit breaker turn off heater if it still happens mark all auxs remove all then try again if it doesnt blow fuse plug 1 in at a time until it does thats ...

...aqualink RS and the pool/spa lights keep turning off and on during its normal program. The spa side control has been replaced, but the problem still exists. If the pool and spa light are on the same ...

...keeps tripping when turned on by Jandy remote. Reset remote and red and green lights are still flashing? Any suggestions? Electrician and Pool guy can't find the problem. Circuit breaker tripping ...

Why does my Jandy Aqualink alarm keep beeping? if it has a aqua pure and it isnt working turn chlorine production to 0 and then get it fixed