...jam at Point B. When the paper exits the bottom of the duplex machine, going towards the registration and the idle roller, past the registration sensors. I have cleaned the registration sensor, the ...
jam that is not visible? "Z" is the duplexer as I'm sure you are aware. Have you swung it away from the machine and ALSO lifted up the black guide (with blue handle) to check behind it? Have you also,
...jam on my okidata 7300 when there is no paper present I inspected top bottom and front no torn pieces visable, including duplexer Hamilton The jam indicator clears when the jam is removed. If you ...
...jam and have Tray 2 installed, pull out the tray and remove the jammed media, if possible. If not, do the following: a. Ensure the device is turned off and disconnect the power cord. b. Lift the ...
Question about Officejet Pro 8500 Wireless All-In-One InkJet Printer
...jam and have Tray 2 installed, pull out the tray and remove the jammed media, if possible. If not, do the following: a. Ensure the device is turned off and disconnect the power cord. b. Lift the ...
...duplex jams I have a t632 that had the fuser replaced in it. Since then I had to take the duplexer off the bottom because it jams every time I try printing. Works fine without the duplexer but I need ...
...jam light goes on. Tried a duplex tray from another printer (same model) and got the same result. The bottom paper tray set properly and rollers appear to be in OK shape (I wiped them all down with a ...
Question about FS2020D ECOSYS Monochrome Laser 35ppm USB20 Parallel Interfaces 500 Sheet p Printer
jam duplexer The duplexer unit is located at the bottom of the printer. You have to remove the paper cassette first. Second, tilt the printer a little on the back side. In place of paper cassette, you
...jam bottom duplex means not printing kept showin jam bottom duplex Hi the main problem for wc3635 and wc3550, when copier is showing that Jam is in duplex is the broken duplex sensor lever Change the ...
Question about CM749A - Officejet Pro 8600 e-All-in-One Wireless Inkjet Printer
...jam and have Tray 2 installed, pull out the tray and remove the jammed media, if possible. If not, do the following: a. Ensure the printer is turned off and disconnect the power cord. b. Lift the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions