No Steam my new iron won't create steam even though all the settings are correctly set and the tank is full Your iron will only steam when it has reached the desired tempeture. When the yellow/orange ...
breville ir23 steam iron This iron auto shuts off when gets a bit warm. Just wondering how to fix it My electronic steam press has been performing perfectly until yesterday. I can not longer get it to
singer iron my singer iron stop working all toghter Hi, Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it. Electric Iron not Heating Up or not Working ...
singer steam press csp-1 iron will not turn on or heat up! Hi, Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it. Electric Iron not Heating Up or not ...
Steam press looking for tank for steam press csp-1 hool to big for stopper Try sew4less.com--has tank & hose for about $16.00. I'm looking for a water tank cap for the same model if you have a source-
Question about CSP1 Iron
my singer magic press 4 iron comes on but the plate will not heat My singer magic press 4 iron comes on but the plate will not heat up. I turn it on one day and it just would not heat up. Not sure how
reset singer iron 1) test the power cord 2) no power to receptacle3)open thermostat4) open the heating element5) defective main switch.6) if you iron has electronic control the board can be faulty.see
Question about 7467S - Confidence Sewing Machine
singer 7467 wheel won't spin, unless little bit if I do manualy by hand... do this If the iron heats but steams improperly, inspect the soleplate and clean the vents (see below) and flush sediment
Question about 7467S - Confidence Sewing Machine
have sticky substance on bottom or iron - howcan i get it off? Was using "iron-on mending tape and put the iron directly on the tape, this was a no-no. The tape stuck to the iron and I can not ...
singer magic steam press 7 Looking for an instruction manual for Singer Magic Steam Press 7 singer magic 7 is used carefully as it is closely to iron so check if wires are connected correctly
Usually answered in minutes!
37 Questions
33 Questions
20 Questions
36 Questions