Questions & Answers for: ir receiver

IR Reliability--Intermittent The receiver works well in all respects...but often it will not respond to IR commands. I've tried other remotes, eliminating my repeater, new batteries, etc. Nothing ...

IR receiver on unit not working? I have been unable to control my VR-505 with the remote control for a long time now. Eliminating all obvious possibilities such as batteries, I attempted to program my

IR Receiver What is the function of the IR Receiver? What is IR? Is it Image Resolution? What happens if this button is blocked? Are you serious? In case you are serious, IR=infrared. When you point ...

...IR receiver 291 Series New TV (6-4-08) Using with Direct TV with the above IR receiver. Power on the TV and the red light in the IR receiver comes on and stays on. Tried a second unit with the same ...

...IR receiver location I need to know the lacation of the IR receiver and the best way to get to it. I know it is behind the screen. I have to control the tv with an IR emitter that has to be attached ...

receiver's IR eye works. But if it is more than 1 inch away, no dice. The problem for me was the TV giving off IR signals that interfered with DISH's poorly designed remote. When the TV's room ambient

receiver: http://www.dishnetwork.com/SupportSection/remote-setup Remotes and receivers models: 222 - 21.0 IR / UHF Pro 222k - 21.0 IR / UHF Pro 301 - 3.4 IR 311 - 3.4 IR 322 - 4.4 IR / UHF Pro 381 - 6

...IR receiver from its USB connection, wait one minute, and plug in the IR receiver. If the pressed buttons continue to repeat, alter the lighting conditions in the room or move the location of the IR ...

...IR receiver on an Onkyo AV Receiver HT-R390 / HT-R290? Where is the IR receiver on an Onkyo AV Receiver HT-R390 / HT-R290? I'm hooking up an IR repeater because my Onkyo unit is in a closed cabinet ...

...IR-210 Receiver? I have a FTA dish directed to Galaxy satellite and have the IR-210 receiver. I need the manual to set my receiver. Thanks To find the manual for your receiver, go to this link: ...