...ip address, the submask and the default gateway. when i put these values in the into the printer it will not print. I was told that when i put the ip address in the printer to change the last digit ...
...IP address, submask, gateway, and change all the setting the install guide gives me to change however, the printer still does not see the NIC. I've powered it on and off and hit the reset on the NIC. ...
Question about Wireless-B Router (wbr-100)
...IP address I set for laptop was192.168.0.51 & submask 250.250.250.250.0 as the booklet instructs but with no success. Please note that I have disabled the internal WIFI and used the LAN network as ...
Question about Wireless-G 802.11g ADSL Gateway
IP ADRESS OR SUBMASK. BUT I CAN GET ON THE NET. HOW DO GET MY PC TO DETECT MY SETTINGS? Open a browser and type http://gateway.2wire.net or http://192.168.1.254; the 2Wire Home page opens.Once you are
Question about Wireless-G 802.11g ADSL Gateway
...ip, submask and gateway for both labtop & Ricoh. are they same? how to solve it? You will need the crossover cable. Set the IP address on the printer (MFP)to whatever you want ( I usually use an ...
...160; its open but username password is not wrking, why. plz send solution check ur adsl link is stable, or config LAN properties as ip: 192.168.1.10 submask: 255.255.255.0 default gateway : ...
Question about Wireless-G 802.11g ADSL Gateway
IP would be 192.168.0.XX submask is 255.255.2550 but if you just need to know your ip for now just go to START>RUN and type CMD that will open command prompt ( quick way is windows sign on keyboard
Question about Wireless-G 802.11g ADSL Gateway
...IP address and submask. I have two internet connections (one wired and one wireless) and both are doing the same thing. I ran a WINSOCK Fix from Microsoft but no success. I also disabled IPV6 but no ...
ip add 192.168.1.4 submask 255.255.255.0 default gateway 192.168.1.1 Press OK. Then goto ie, type 192.168.1.. Then enter username as admin, password as admin. you can configure your router. if it won&
...IP adress Gateway your submask activate and deactivate the port with an adress at 9100 and at the end display Terminé respectiveley If you want to modify your IP address,then you can follow the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
