Questions & Answers for: intake systems

Question about 1999 Grand Am GT

3 Answers

1999 Pontiac Grand Am with "lower intake leak"...What does this mean specifically? Would this mean the intake for the radiator, gasket, or valve? Usually intake has to do with the induction system, as

Ad

...Audi: Ignition Coil Power Output Stage 3 Short to B+ BMW: Misfire During Start Cylinder 3 Buick: Intake Camshaft Position [CMP] Sensor System Performance Cadillac: Intake Camshaft Position [CMP] ...

Ad

need to replace intake manifold how do you do this Bonneville, LeSabre, Park Avenue 2000-2005 Intake Manifold - Removal & Installation 3.8L Engine VIN 1 Engine Before servicing the vehicle, refer ...

...to make your job easier. Don't forget to rate this post!! To get to the fuel rail assembly, the intake manifold must be removed follow the indications below to service the injectors. The 3.3L ...

Question about 2005 Sonata

2 Answers

...System - Lambda Controller at the Limit (Bank 1Visually/physically inspect for air leakage in intake/exhaust system as following items.A.Vacuum hoses for splits, kinks and improper connections. ...

Question about 2007 G6 GT Convertible

1 Answer

...trouble, you most likely have a leak in your EVAP system which is allowing extra air into your intake.Attach a vacuum gauge to intake manifold vacuum and start the engine. You should see 19-21 ...

I need to see a coolant system hose that leaks does the intake have to be removed just had radiator flushed but coolant leaks. do i really have to remove intake to change some of the hoses? Yes there ...

Question about 1997 Villager

1 Answer

I have the codes are po171 ..po174 code p 0171 refers to system too lean bank 1===causes --intake /exhaust leak---air system---MAF/VAF sensor--fuel pressure / pump---injector/ s---HO2S code p 0172 ...

...systems. (13) Remove the A/C compressor bolts and set the compressor on the fan shroud. (14) Remove the support bracket from the intake manifold and the mounting bracket. (15) Remove intake manifold ...

2003 Ford Explorer 4.0L engine melts intake manifold Replace y-pipe with 3 cat converters, replaced plugs, injectors, and the intake. 1000 miles later the intake is melted again. replace the faulty ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...