Questions & Answers for: Mitsubishi Montero Sport intake plenum torque

Question about 2003 Montero Sport

2 Answers

...intake plenum, valve covers, and replace the spark plugs? I changed my spark plugs and wires myself two days ago after a quote of around $550 from a local repair shop with welcomed success. It's ...

Ad

Question about 2004 Montero Sport

2 Answers

...intake (or plenum) from the engine there are @ 8-10 No. 12 nuts and or bolts which hold this in place. There are also 1-2 bracket (check by the firewall) you'll need to unbolt too. Be certain to ...

Ad

Question about 1999 Montero Sport

3 Answers

...intake manifold losing its torque. their are four water ports right next to valve ports. two in front two at rear of intake manifold. they warp fairly easy.so check before re installing worn seals on ...

...are the spark plugs located in a 2002 mitsub... Where are the spark plugs located in a 2002 mitsubihi montero sport? in the valve covers under intake plenum and yes you have to remove it to change ...

Question about 2002 Montero Sport

1 Answer

...intake plenum and most everything attached to it coils hoses throttle body brackets .then remove the plug wires from the plugs ans change the plugs make sure you use only denso or ngk iridium plugs ...

how to change sparkplugs in a 1999 mitsubishi montero sport 3.0 engine do i have to take intake manifold off? Yes and be carefull re installing plenum gasket this is a compresion

...differential pressure sensor).Located on top of the intake manifold plenum. This monitor the EGR operation. The MDP has a tendency to plug.Inspect and see if its plugged from the vacuum

Question about 1996 Montero Sport

1 Answer

intake plenum 11-14 ft lbs.camshaft bearing cap 14-15 ft lbs.connecting rod nut 37-38 ft lbs.camshaft sprocket bolt 66-67 ft lbs.crankshaft pulley bolt 108-116 ft lbs.cylinder head bolts 65-72 ft lbs.

Question about 2002 Montero Sport

2 Answers

p0741 code torque converter clutch solenoid P0741 MITSUBISHI - Torque Converter Clutch System Malfunctionhttp://engine-codes.com/p0741_mitsubishi.htmlForum CodePossible causes- Low transmission fluid ...

intake air sensor is next to it. All are located in the air induction plenum. Between the throttle body and the air filter. The Engine gas recirculation valve/sensor is right behind the throttle body.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...