intake manifold .and throttle body for a 2002 ford ,mustang ,v-6 ,3.8L not listed in my alldata book sorry ,american ford not europeon cast iron heads will be about 80lbs ,start in the middle and work
Question about 2000 Taurus
INTAKE MANIFOLD SIDE (6) (4) (2) (8) (5) (1) (3) (7) EXHAUST MANIFOLD SIDE Start with 1 then 2 and so on. . Tighten the bolts to 47 ft. lbs Then back all the off 1 full turn. then in the same order re
Question about 2000 Taurus
...intake manifold and *** exhaust had a first step torque of 5 to 7 foot-pounds.*** The intake manifoldhad a second step torque of 14 to 21 foot-pounds while the *** exhaust manifold had a second step ...
Question about 2000 Taurus
...intake manifold bolts and plenum bolts. Just replace upper and lower gaskets you didn't give year or vehicle model and all are different so go to auto zone and by the Chilton's book for your vehicle ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions