Questions & Answers for: Chevrolet S 10 intake manifold gasket

Question about 1998 S-10 Pickup

1 Answer

...Is the problem my intake gasket or my manifold gasket/ Almost sound like the problem is a head gasket. Is the oil a milky color? if so that is water in the oil and you have blown a head

Ad

Question about 1999 S-10 Pickup

1 Answer

...Now the intake manifold gasket is blown. I don't think the gasket was the original problem or it would not have past the pressure test. thanks, Ken Is the car boiling over? Might be a faulty

Ad

...intake how do I change the manifold gaskets?the engine is a 4.3 liter V-6 actual changing the gasket is not a hard job. I strongly suggest you go to a parts store and buy a haynes or chiltons manual ...

...not from block. it may be a bad head gasket if it is leaking coolant. check to find the source of the leak. or if its leaking coolant from intake manifold gasket. also check water pump and all

Question about 1998 S-10 Pickup

1 Answer

...liter engine. that engine is suspect to external head gasket failures. it is very obvious once seen. if you have the 4.3 liter..they are suspect to the intake manifold gaskets leaking...hope this ...

...intake manifold. What can it be? I have 2 ideas of what it could be. A head gasket or manifold gasket. intake manifold gasket. when it leaks water will enter a cylinder causing the sprark plug to ...

Question about 2003 S-10

1 Answer

...intake manifold. It simply plugs in to the manifold with sinthitc red seals as the gasket has a three wire connector and is easy to replace in alomst the center of the manifold mid way in relation to ...

Question about 1984 S-10

1 Answer

intake manifold gasket, valve cover gaskets, and probably the water pump gasket because they cant be put back on without new ones. I need a dyi on the full R&I for the gasket as well as parts that

Question about 1993 S-10

2 Answers

...intake manifold gasket, a common problem. Has your coolant level been dropping lately? If so then the coolant may be entering some of the cylinders and then shorting accross the sparkplugs. Youtube ...

...intake manifold gasket first that is most likely your problem and you don't have to remove the heads to do this . Over heat these engines once and this will happen and its a lot cheaper and far ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...