Questions & Answers for: Oldsmobile Silhouette intake cleaner

intake port and feel inside the throttle bore you will feel a hole in one side or the top. Clean that out real well with a brake cleaner or carb cleaner solvent. You may also want to clean out the the

intake manifold vacuum hose. === clean throttle plate with Berryman carburator cleaner SEE sample picture HERE === Also remove carbon built up behind the EGR valve and the EGR passage tube. === Vacuum

intake man. gasket, new after market (not original equpt.) fuel pump and fuel quanity sending unit, coolant flush, 2 oil changes, Lucas brand fuel system cleaner added to fuel, New OEM leads and plugs

cleaner. As long as its floored, runs good, Idle is good and no codes, no Check engine lite. fuel pressure is good, new plugs. Vacum is 17 at idle, checked intake with either - no external manifold or

cleaner and duct assembly, and the crossover exhaust pipe, as well. Follow the upper radiator hose to the thermostat housing. Its REAL hard to get at, If the intake manifold is leaking coolant (common

...intake is locater.. or where to open carb to spray in fluid. there is a large tube that goes to your throttle body (you do not have a carb), remove it and spray there-be careful, starter fluid is ...

...cleaner intake duct clamps from the Mas Airflow sensor and the throttle body. Disconect Intake Air Temperature sensor connector. Disconnect the vent tube from the air cleaner intake duct. Disconnect ...

intake manifold. 5. Note any and all electrical connections to the throttle body. 6. Remove the electrical connections (unplug) and remove the bolts (4) and the throttle body should come off. 7. Spray

the gasket at all.It's like silicone but really tough,lasts for ever ,never leaks. It is a bit pricy tho. Use a spray can of intake cleaner to get the block and pan nice and clean before the "silicone

intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some