Questions & Answers for: Ford F-250 intake cleaner

...intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, ...

...LIGHT IS ON AND GIVING YOU CODES PO171 AND PO174 I WOULD CHECK THE GASKETS BY SPRAYING CARB. CLEANER AROUND THE INTAKE WHILE THE ENGINE IS RUNNING. IF THE IDLE SPEEDS UP THEN THAT IS YOUR

...intake manifold runners, they **** in, done 100's. to confirm this just spray carb cleaner at inside and outside base, when u hit the leak you will hear it. see photo. Most likely your leak is the ...

...shut it off it wont start V8 5litre engine when it does this spray starting fluid into the air intake of the engine at the air cleaner and see if itr starts, if it does you have a sticking fuel

...cleaner spay & spay around throttle,,air intake area ,,& base gasket.. Does it still idle high with IAC unplugged? Look for vacuum leak at PCV valve, brake booster, egr valve, intake gasket ...

...check for vacuum leaks, especially on intake manifold gaskets. I use carb cleaner or ether to spray around. If engine revs where I spray, there's the leak. If this doesn't solve, please let us

...Intake air temp sensor. On the black tube from the air cleaner to the throttle body there should be a small senser. That is your Intake air temp. Sometimes those get unplugged when servicing air ...

flood, pool carb cleaner in intake as this is not healthy for engine either. You can do this with engine running, so as not to pool, but slowly is best, both in engine speed and volume of carb cleaner

intake & sprayed carb cleaner into both sides. nothing. changed plugs, wires, cap, rotor, & module. same result turns over great just wont start. don't have pressure guage to check the

...intake cleaner it says on the instructions to run it through the vacuum intake of the cars injection fuel rail could you tell me how that's done on my 1991 ford f 250 xlt 7.5 liter 460 2 wd truck ...