Questions & Answers for: installing washer basement

...washer in basement, but had to extend the drain hose to 7 feet. Installed a check valve so that water would not drain back. Worked fine the first load but all other loads on the spin cycle all the ...

washer is full, flooding my basement and not emptying. Also, a few days ago, the washer was making squeaking noise. Tried to take out barrel, but its full of water. Sears guy cant come out for a week,

...washer shakes so violently (does not stop cycle), that it shakes the whole house, so much so we can feel it all the way on the main floor. Any suggestions? I am at the point of thinking it might have ...

Installing a Washer in basement Installing my Washer in basement, the drain comes down the wall off of the main sewer line and stops half way down the wall, has a threaded fitting, and was trying to ...

...basement. Can you see the washer drain line,or is it inside the wall. You should never smell sewer, I would find a good plumber,or a handy man that knows plumbing, and have him open the wall (if ...

...basement. we have a new septic system and the washer had to be hooked into the septic. (it previously had gone into a dry well. To do this we have the hose of the washer going up to the drain in the ...

washer. Recently bought a new house, only way to access basement is up 5 steps on side of house to landing with railing.cannot turn machine on landing so door is facing out so it will fit through. Can

...washer. I believe it can be done,but I dont think it is recommended by the manufacturer. if you are in a basement and that is your only option, the only suggestion I would have is to build a platform ...

...basement and worked fine, but we decided to clean up the original installation which was not code. We had a plumber move water outlet to a separate outlet. I have to remove the washer basket and bail ...

...basement and have had an outlet box installed for the washing machine (which previously drained in a tub). During the rinse/spin cycle, there are suds coming out of the box. The plumming seems fine ...