...install it. I know the O2 sensor is in the exhaust manifold if you look under the hood behind your engine you'll see a thick pencil like metal piece sticking out your exhaust manifold with 2 wires. ...
...intake manifold. It is a threaded device (brass), with a wire(s) attached to it. The wires need to be removed, and the sensor is unscrewed with a deep wall socket (or wrench) at the bottom where the ...
...intake side8-2-pin connector For knock sensor 2 -G66- Contacts gold plated Do not interchange 9-20 Nm Tightening torque influences the function of the knock sensor10-Spark plug, 30 Nm Type and ...
install on a 87 vw golf do I need to remove the intake manifold? You do not need to remove the intake manifold to change the exhaust manifold on this vehicle. There are 8 bolts or studs that can
...#2 piston rings installed up side down, most likely. It could also be bad valve seals. It could be a leaky valve cover and torn rubber hoses at the intake track, leaking around the exhaust
Usually answered in minutes!
1,066 Questions
644 Questions
543 Questions
519 Questions
376 Questions