Questions & Answers for: Mazda 626 how to install a intake manifold

...just the runner control. see this all the time at work the part is about 175.00 and an hour and a half to install. your local dealer should be able to fix this for you Replace the intake

intake manifold bracket. Label and disconnect the wiring at the starter. Remove the starter bolts and remove the starter for a 2.5L engine disconnect the neg. battery cable. Remove the fresh air duct.

intake manifold vacuum hose. === clean throttle plate with Berryman carburator cleaner SEE sample picture HERE === Also remove carbon built up behind the EGR valve and the EGR passage tube. === Vacuum

...intake duct and the air filter housing. (assuming this your car is 4-cylinder) Remove the bracket that runs between the inlet manifold and the starter-motor. The starter-motor is by the left-side of ...

intake manifold bracket. Fig. 7: Raise and safely support the front of the vehicle, then label and detach any plug-on wire connectors Fig. 8: Using the proper size socket or wrench, remove the battery

...intake manifold and components attached (e.g. EGR, IAC), examine ignition components, fuel quality, and electrical connections. Are all items okay?Yes - Go to next stepNo - Service as required.2. ...